Can you open the Jeep Renegade trunk from inside? Yes, you can open the Jeep Renegade trunk from inside the cabin. This guide will show you how to access the Renegade rear hatch unlock button and operate the Renegade trunk from the driver’s seat, allowing you to open the Jeep Renegade boot from the cabin using the Jeep Renegade interior hatch opener or the Jeep Renegade cargo door inside handle. We’ll also cover the Jeep Renegade emergency trunk release and how to access the Renegade trunk from the back seat.
Image Source: www.tiktok.com
Accessing the Renegade Rear Hatch Unlock Button
The Jeep Renegade is designed with convenience in mind, and that includes easy access to the cargo area. For those times when you need to open the trunk from within the vehicle, locating and using the Jeep Renegade internal trunk release is straightforward. This feature is essential for both everyday use and in emergency situations.
Locating the Internal Release Mechanism
Most modern vehicles, including the Jeep Renegade, provide a way to open the trunk from the inside. This is often a physical lever or a button. The primary location for this is typically near the driver’s seat or accessible from the rear seating area.
The Driver’s Side Solution
The most common and user-friendly method for operating the Renegade trunk from the driver’s seat involves a dedicated release located within the driver’s cabin. This is part of the vehicle’s overall security and convenience features.
Under the Steering Column
Often, manufacturers place these types of releases in an inconspicuous yet accessible location for the driver. For the Jeep Renegade, a frequent spot is found near the driver’s side door, often beneath the steering column or on the lower part of the dashboard. Look for a small lever or a button. This is your primary Jeep Renegade rear hatch unlock button.
Identifying the Lever
The Jeep Renegade cargo door inside handle might not be a traditional “handle” in the sense of a pull-out lever. Instead, it’s usually a small, often red or black, lever. It’s designed to be easily distinguishable. The aim is for a driver to be able to locate it by feel if needed, especially in low light conditions.
The Importance of the Internal Release
This internal release is more than just a convenience feature. It’s a crucial safety element. In situations where someone might be accidentally locked inside the trunk (a rare but possible occurrence), this mechanism provides a way to escape. It’s part of the Jeep Renegade emergency trunk release system.
How to Open Jeep Renegade Trunk From Inside: Step-by-Step
Opening the Jeep Renegade trunk from inside is a simple process once you know where to look. The Jeep Renegade internal trunk release is your key to accessing the cargo space without leaving the vehicle.
Step 1: Locate the Release Lever/Button
The first step is to find the Renegade rear hatch unlock button or lever. As mentioned, this is typically found in the driver’s footwell area, often on the left side of the driver’s seat, attached to the dashboard or the panel just below the steering column.
A Closer Look at the Location
Imagine sitting in the driver’s seat. Extend your left leg slightly and reach down towards the floor. You should feel for a lever or a button. It might be integrated into a panel. The goal is to find the specific Jeep Renegade interior hatch opener.
Step 2: Engage the Release
Once you’ve found the lever, give it a firm pull. If it’s a button, press it firmly. This action will disengage the locking mechanism of the rear hatch.
What Happens Next?
When you pull the lever or press the button, you should hear a distinct “click” sound. This indicates that the trunk latch has been released.
Step 3: Open the Rear Hatch
After releasing the latch, you can then proceed to open the trunk lid.
Manual Operation
The Jeep Renegade typically requires you to lift the rear hatch manually after the latch has been released by the internal mechanism. Gently push upwards on the rear hatch from the outside, or if you have a clear path, you might be able to reach back and lift it from an exterior handle designed for this purpose. This is how you open Jeep Renegade boot from cabin effectively.
Accessing the Renegade Trunk from the Back Seat
For passengers in the rear, there’s also a way to access Renegade trunk from back seat. This usually involves a specific procedure that utilizes the internal release mechanism, often in conjunction with the folding rear seats.
Folding the Rear Seats
In many SUVs, including the Jeep Renegade, the rear seats are designed to fold down to expand the cargo area. This also provides a pathway to the trunk.
Unlatching the Seats
Each section of the rear seat typically has a release lever or button, often located on the top edge of the seatback. Pulling this will allow you to fold the seat forward.
Gaining Entry Through the Rear Seat
Once a rear seat is folded down, it creates an opening into the cargo area.
Reaching the Release from the Back
While you can’t directly operate the main trunk release lever from the back seat, folding the seats provides direct physical access to the cargo space. This is particularly useful if you need to retrieve something from the trunk without the driver needing to open it. This method is a practical way to open Jeep Renegade boot from cabin for rear passengers.
The Jeep Renegade Emergency Trunk Release
Safety is paramount, and the Jeep Renegade emergency trunk release is a critical feature. While primarily designed for safety in the event of accidental entrapment, it’s good to know it exists and where it’s located.
Location of the Emergency Release
The emergency release mechanism in most vehicles is designed to be highly visible and easily accessible from within the trunk itself. For the Jeep Renegade, this would typically be a glow-in-the-dark handle or lever situated on the inside of the trunk lid.
Inside the Cargo Compartment
This feature is located on the inner surface of the tailgate, allowing anyone trapped inside to open the trunk from the exterior of the vehicle. It’s a universally recognized safety standard.
How it Works
The emergency release is a mechanical override. It bypasses the vehicle’s electronic locking system and directly actuates the trunk latch. Even if the vehicle’s battery is dead or the primary internal release fails, this mechanism should still function.
Troubleshooting Common Issues
Occasionally, you might encounter problems with your Jeep Renegade internal trunk release. Here are some common issues and potential solutions.
Trunk Not Opening
If you pull the Renegade rear hatch unlock button and nothing happens, there could be a few reasons.
Potential Causes:
- Obstruction: Something might be physically blocking the trunk latch from releasing. Check for items in the cargo area that might be pressing against the hatch.
- Faulty Cable/Actuator: The cable connecting the internal release to the latch, or the electric actuator itself, might be damaged or disconnected.
- Electrical Issues: If your Renegade has an electronic release, a blown fuse or a wiring problem could be the cause.
Solutions:
- Check for Obstructions: Ensure nothing is jamming the trunk.
- Inspect Fuses: Consult your owner’s manual to find the fuse for the power liftgate or trunk release and check if it’s blown.
- Seek Professional Help: If the problem persists, it’s best to visit a Jeep dealership or a qualified mechanic to diagnose and repair the issue with the Jeep Renegade cargo door inside handle.
Difficulty Operating the Lever
Sometimes, the internal release lever can become stiff or difficult to operate.
Potential Causes:
- Dirt and Debris: Accumulation of dirt or grime can impede the smooth movement of the lever.
- Corrosion: In areas with high humidity or salt exposure, corrosion can affect the mechanism.
Solutions:
- Lubrication: A small amount of lubricant (like WD-40 or silicone spray) applied carefully to the lever mechanism might help. Be sure to wipe away any excess.
- Professional Cleaning: If the lever is severely stiff, a mechanic might be able to clean and service the mechanism.
Using the Key Fob for Trunk Access
While this guide focuses on how to open Jeep Renegade trunk from inside, it’s worth mentioning that the key fob offers another convenient way to access the trunk.
Key Fob Functions
Your Jeep Renegade key fob usually has a dedicated button for opening the trunk. Pressing this button once typically unlocks the trunk, and pressing and holding it often opens the rear hatch automatically.
Advantages of Key Fob Use
- Convenience: Allows you to open the trunk from a distance.
- Hands-Free Operation: Useful when your hands are full.
Frequently Asked Questions (FAQ)
Q1: Where is the Jeep Renegade internal trunk release located?
A1: The Jeep Renegade internal trunk release is typically found on the driver’s side, usually in the footwell area, beneath or to the left of the steering column. It’s often a lever.
Q2: Can I open the Jeep Renegade trunk from the back seat without folding the seats?
A2: No, you cannot directly operate the main trunk release lever from the back seat without folding the seats. However, folding the seats provides direct access to the cargo area.
Q3: What is the Jeep Renegade emergency trunk release?
A3: The Jeep Renegade emergency trunk release is a safety feature located on the inside of the trunk lid, usually a glow-in-the-dark handle, designed to allow escape from within the trunk.
Q4: Does the Jeep Renegade have a power liftgate that can be opened from inside?
A4: Some Jeep Renegade trims may come with a power liftgate. If equipped, the Jeep Renegade rear hatch unlock button or a button on the dashboard may be used to operate it electronically. Always check your specific model’s features.
Q5: How do I find the Jeep Renegade cargo door inside handle if I can’t see it?
A5: If you can’t see the Jeep Renegade cargo door inside handle, feel around the driver’s side footwell and lower dashboard area. It’s usually a lever that’s designed to be found by touch.
Q6: Is it possible to open the Renegade tailgate from inside the car?
A6: Yes, it is absolutely possible to open Jeep Renegade trunk from cabin. The primary method is using the internal release lever located on the driver’s side.
Q7: What if the button to open the Jeep Renegade rear compartment unlock doesn’t work?
A7: If the Jeep Renegade rear compartment unlock button isn’t working, check for blown fuses related to the trunk release or look for any obstructions. If the problem continues, professional diagnosis is recommended.
Q8: How do I access the Jeep Renegade trunk from the back seat?
A8: To access Renegade trunk from back seat, you’ll need to fold down the rear seats. This creates a passage into the cargo area.
Q9: Can I operate the Renegade trunk from the driver’s seat if the car is off?
A9: Yes, you can typically operate the Renegade trunk from the driver’s seat even when the car is turned off, as the internal release is usually a mechanical or directly powered function.
Q10: What should I do if the Jeep Renegade interior hatch opener is stuck?
A10: If the Jeep Renegade interior hatch opener is stuck, first check for obvious obstructions. If none are found, a small amount of lubricant might help. If it remains stuck, it’s best to have it inspected by a mechanic.
This comprehensive guide should provide you with all the necessary information to confidently open Jeep Renegade boot from cabin, utilize the Jeep Renegade internal trunk release, and understand the safety features like the Jeep Renegade emergency trunk release. Happy adventuring!